Black Metal Savannah Spindle

These spindles are part of the black metal range of modern and contemporary stair parts.

These spindles are to be used in conjunction with either a landing or rake bracket which screws onto a hand and base rail, to hold the spindles in position.

When used on the rising staircase, thes spindles can only be used on staircases of between 38 and 45 degree angles.

The spindles are made from mild steel, with a zinc phosphate coating, with a black powder coating with a hammered finish.

The Savannah spindle is square with a basket in the middle and two tight twists towards the end of the spindle. Fits perfectly with both the Edisto andamp; Charleston spindle. 

Spindle size: 850mm x 12.5mm x 12.5mm.

There is approximatley 120mm at each end before the twist starts.